Rebar Threading Machine
Rebar Threading Machine
is used for Cutting External Thread on component
by Chasing method. HSS Tangential Chasers are used as cutters.
Component
remains stationery and Die Head rotates. Matric, BSP, BSPT, NPT,
UNF,UNC, BSW, Acme Threads B.S.F etc. threads can be cut on this
machine depending upon the type of Chasers. The machine mainly consists
the following:-REBAR THREADING MACHINES are designed to give maximum efficiency and reliable performance under the most severe conditions of service with minimum maintenance cost. All the necessary requirements are combined in this model to from the basic fundamentals of correct threading. All the gears are made of case hardened steel with extra large face with and tooth thickness and cut on hobbing machine for noiseless operation even at high speed. Naturally the are built with high standards of workmanship, material and quality so closely associated with COMPANY TRADITION.
DESIGN &
WORKMANSHIP: The TRUE WORKS MACHINERY & TOOLS,
thread cutting machines are designed to produce quality threads within the tolerance
for which they were intended.
HEAD STOCK:
A heavy duty geared Head Box is of best quality casting providing
support to the spindle bearings. The box is of gear type, lubricated,
fitted with three extra heavy duty bearings.
THE BED:
The bed is pillar type having two pillars made of best
quality steel
nicely finished & duly hard chrome plated in the most modern
hard chrome plating unit.
THE SADDLE:
The Saddle is fitted on two pillars very precisely. It runs on pillars
very smoothly and accurately to the Head Stock alignment.
THE APRON:The apron
gives movement to the saddle with head transfer along with
pillars through steel rack and pinion arrangements. It's all gears are
made of best quality steel.
VICE JAWS:
The vice jaws made from the best quality alloy steel are fitted on the
saddle well aligned with the head stock center fitted in a heavy duty
box type vice. The jaws are heat treated. The movements of jaws are
controlled by a screw on the saddle.
Specification
| Model | 1/4"
to 1" (Bed Type) |
3/8"
to 1.1/2" (Bed Type) |
1/2"
to 2.1/2" (Bed type) |
1"
to
4" (Pillar Type) |
| Saddle Movement | 10" | 10" - 12" | 12" - 16" | 10" - 12" |
| Spindle Speed Range | 60-90 | 60-90 | 60-90-120 | 40-75-115 |
| Number of Spindle Speed | 2 | 2 | 3 | 3 |
| Capacity | 1/4" to 1" | 3/8" to 1.1/2" | 1/2" to 2.1/2" | 1" to 4" |
| Production per Hour | 60-80 | 60-80 | 70-90 | 35-40 |
| H.P. Required | 3 H.P. | 3 H.P. | 7.5 H.P. | 12.5 H.P. 960 |
| Lead Screw | Optional | Optional | Optional | Provided |
| Weight (KG) Aprox. | 500 | 550 | 990 | 1600 |
